Related Products

Kimber Mfg 1911 Auto Ambidextrous Thumb Safety

Kimber Mfg 1911 Auto Ambidextrous Safety

Low-profile pads won't snag on clothing or gear. Can also be installed as an upgrade part on Government Model, Commander, and clones. SPECS: Steel, black. Fits Kimber 1911 pistols, Government Model, Commander, and clones. Ambidextrous thumb safety includes a unique, captive hammer pin for added support of the right paddle to provide exceptionally smooth, reliable operation. 3/16"" (4.8mm) wide x 7/8"" (2.2cm) long left side contact area x 1"" (2.5cm) long right side contact area. Gunsmith fitting required may need to be filed for sear clearance. Factory replacement part for Kimber 1911 equipped with an ambidextrous safety. Mfg: Kimber Mfg. ...

Price: $59.99 | Merchant: Brownells | Date: May-24, 2018



Brownells Can T Mar 1911 Bushing Wrench

Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP) , plus copies. Made from super tough ABS ""T"" grade polymers, Brownells Can't Mar wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar wrench carries easily in pocket or field kit. Mfg: Brownells SPECS: 5 1/2"" (14.0cm) long. 1 1/4"" (3.2cm) wide. .187"" (4.75mm) thick. Weighs 1 oz. (28.3gm) .

Price: $6.99 | Merchant: Brownells


Egw 1911 Auto Frame Cutter Wilson Nowlin Ramped Barrel

End-mill cutter helps you quickly convert a standard 1911 frame for precise fit of a Wilson/Nowlin ramped barrel. Use in a lathe or milling machine to cleanly remove the frame's feed ramp and true up factory flaws found in many frames to allow proper contact with the barrel feet. Helps ensure a cleaner impact surface that prevents excess battering and uneven stresses on the feet for longer barrel life. Manufactured from U.S.-sourced M42 high-speed tool steel blanks for precise cutting surfaces that stay sharp. One-piece design means nothing to work loose halfway through the job. Shank is long enough to clear full-length dust covers. Mfg: Egw SPECS: Tool steel, in-the-white. 6"" (15.2cm) long, 7/16"" (11.1mm) diameter cutter, 1/2"" (12.7mm) diameter shank.

Price: $60.00 | Merchant: Brownells


Cylinder Amp Slide 1911 Auto Spec Recoil Spring Plug

Machined steel recoil plug has mil-spec flange punched into the side so the recoil spring can be wound into the plug before seating in the slide. Prevents the plug from flying off spring during field stripping and getting lost or hitting the operator, possibly causing injury. Precision-turned for proper fit in full-size Government model pistols, with flat, diamond-pattern knurling on the front. If you lose the plug, your gun can't operate, and you're done for the day. Keep one or two of these in your range box or field maintenance kit for backup. Mfg: Cylinder & Slide SPECS: Steel, blued. 1 1/2"" (3.8cm) long, .495"" (12.6mm) O.D. Fits mil-spec Government model.

Price: $9.99 | Merchant: Brownells


Brownells 1911 Auto Magazine Lip Tools

No amount of accurizing will make a 1911 Auto shoot wadcutter ammo if the magazine's feed lips aren't right. These tools easily reform the lips to the optimum angle, curing the tendency of wadcutters to jam against the ramp. ""Anvil"" fits inside the magazine and establishes the angle. ""Yoke"" (designed by Lou Woll while at Rock Island Arsenal) fits over the lips and ensures that both sides will be identical. Mfg: Brownells SPECS: 1018 Steel, hardened to Rc 50. Anvil - 2 3/4"" (70cm) x 1 1/4"" (3.2cm) x 3/8"" (9.5mm) . Yoke - 3"" (7.6cm) x 1"" (2.5cm) x 5/8"" (41.2mm) . Set includes one of each. Instructions included.

Price: $60.95 | Merchant: Brownells


Kimber Mfg 1911 Auto Ambidextrous Safety

Ambidextrous thumb safety includes a unique, captive hammer pin for added support of the right paddle to provide exceptionally smooth, reliable operation. Factory replacement part for Kimber 1911 equipped with an ambidextrous safety. Can also be installed as an upgrade part on Government Model, Commander, and clones. Low-profile pads won't snag on clothing or gear. Mfg: Kimber Mfg. SPECS: Steel, black. 3/16"" (4.8mm) wide x 7/8"" (2.2cm) long left side contact area x 1"" (2.5cm) long right side contact area. Fits Kimber 1911 pistols, Government Model, Commander, and clones. Gunsmith fitting required; may need to be filed for sear clearance.

Price: $59.99 | Merchant: Brownells


1911 Auto Firing Pin Safety Block Spring

Replaces weak or broken firing pin safety springs in all Series 80 and 90 pistols with a firing pin safety block. Fits Colt 1911, 1911A1, 1991, Government, MKIV, Gold Cup, Commander and Officers model. Mfg: Wolff

Price: $7.49 | Merchant: Brownells